Views: 11 Author: TH-CS1 Publish Time: 2019-01-03 Origin: Site
Function analysis
After starting electric juicer, the motor drives knives net to rotateat high speed. We need to push fruits and vegetables from loading port to the knife net. The sharp thorns of the knife net crush fruits and vegetables. Under the centrifugal force of the juicer produced by the high-speed operation of the knife net,the fruit dregs fly out of the knife net into theslag box, and the fruit juice flows into the juice cup through the knife net.
Matters needing attention
1. the operation of the electric juicer should be simple and have the function of safety protection.
2. the cleaning of the juice press is simple and easy to operate.
3. the function of the juicer. A good juicer mainly depends on the effect of juicing.
4. the components of the electric juicer should be of high quality, especially the blades and other parts.
5. the speed of the juicer must be uniform and slow, at least under 100 rpm, the best 70-90 rpm. there was no noisy and little vibration when the juicer was turning. Can the switch stop running immediately?
6. it is better to choose the shell of the electric juicer. Because this is the beverage that we drink, the plastic of the electric juicer must be clean and sanitary. Make sure that the plastic of the electric juice press dose not give out the taste of plastic, which guarantees people's health .
Cleaning skills
1. Winding fruit with a juicer is the most common thing, and after squeezing the fruit, cleaning is not easy.
2. At this time, we can take out the clogged fibers on the knife head of the juicer slowly according to the direction of the juicer. Don't exert too much!
3. Then clean. The other parts can be washed with steel wire Juicer ball, but not too hard
